mercredi 7 octobre 2015

Some Of The Things You Need To Know When Buying And Wearing Cheap Neckties

By Sharon Weeks


Don't be wary of "cheap". If you want new and cheap neckties, listen up. You can get good quality if you know what you want. Do you need a certain width or size? Do you want a readymade discount job or an expensive handmade Italian label? What is off the rack at one shop is different from another.

Tie widths come and go; if you want to be in style, find out what is current. 3.75 inches will do nicely. Some larger men like a little extra for proportion, so keep that in mind. Skinny ties are favored by younger men who want to look retro hip. One rule of thumb when shopping is to use a dollar bill to measure your prospective purchase. Fold the bill in half for a three-inch ruler. You can then judge quickly the width of your tie.

It is a matter of what is in style, what is regular (right now it is 3.75 inches), and what looks right. You don't get the same results from an off-the-rack budget item from a not-too-expensive outlet as you do from posh or expensive one. When measuring, try the dollar test. Fold a bill in half and you have a quick three-inch measuring tape.

When it comes to fabric and construction, you need a practiced eye that can discern quality from schlock. Turn the tie over and look at the stitching. Look at the fabric label and opt for silk if you can. It drapes better than synthetics and has superior texture and sheen.

How are they made, you may ask? The manufacturer folds a single piece of fabric over itself. It will have an interior lining that makes a difference between good fabrication and bad. Wool is often used in expensive ties but seldom in cheaper versions. Blended wool will do fine. You want a fine fabric inside and out.

Another element of a good tie to notice is the slip stitch found on the back if you open the tie a bit. A loose black thread hangs lengthwise, not visible normally. It is not a defect but a "slip stitch" that runs down the center of the tie to encourage it to move up and down as you adjust your knot.

Another type of stitch is the slip stitch. Look on the back and you will find a loose thread that hangs lengthwise. At first, you might think it is a defect, but this extra stitch down the center of the tie ensures that the fabric can shift up and down while creating your knot. Real connoisseurs talk about triple construction referring to the way ties are made using multiple pieces of cloth that have been cut across the bolt. Look for two different seams as you feel the fabric along its length. Remember that your tie must sit neatly about your neck and hang smoothly.

So there is cheap and there is expensive. There are two panels or three. Don't compromise on fit, however. Be sure the thing fits well around the neck and that the fabric drapes nicely. These details matter and will help you find the perfect tie.




About the Author:



Aucun commentaire:

Enregistrer un commentaire